Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for Uf System Water Treatment , Uf Membrane Filter , Mbr Membrane Bioreactor , We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
factory Outlets for Ultrafiltration Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo Detail:
Product Overview
MBR is a combination of membrane technology and bio-chemical reaction in water treatment. MBR filter the sewage in bio-chemical tank with membrane so that sludge and water are separated. On one hand, membrane rejects microorganisms in the tank, which greatly increase the concentration of activated sludge to a high level, thus the bio-chemical reaction of sewage degradation processes more rapidly and thoroughly. On the other hand, water output is clear and of high quality because of high precision of membrane.
This product adopts reinforced modified PVDF material, which will not peel or break when backwashing, meanwhile has good permeable rate, mechanical performance, chemical resistance and pollution resistance. ID & OD of reinforced hollow fiber membrane are 1.0mm and 2.2mm respectively, filtration precision is 0.1 micron. Filtration mode is outside-in, that is raw water, driven by differential pressure, permeates into the hollow fibers, while bacteria, colloids, suspended solids and microorganisms etc. are rejected in the membrane tank.
Applications
●Treatment, recycle and reuse of industrial waste water.
●Treatment of refuse leachate.
●Upgrade and reuse of municipal sewage.
Filtration Performance
No. |
Item |
Water?Output?Index |
1 |
TSS |
≤1mg/L |
2 |
Turbidity |
≤?1 |
Specifications
Size
Technical Parameters
Structure |
Outside-in |
Membrane?Material |
Reinforced Modified?PVDF |
Precision |
0.1 ?micron |
Membrane?Area |
25m2 |
Membrane?ID/OD |
1.0mm/ 2.2mm |
Size |
785mm×2000mm×40mm |
Joint Size |
DN32 |
Component Material
Component |
Material |
Hollow Fiber Membrane |
Reinforced Modified PVDF |
Sealing Compound |
Epoxy Resins + Polyurethane?(PU) |
Housing |
ABS |
Application Parameters
Designed?Flux |
10~25L/m2.h |
Backwashing?Flux |
30~60L/m2.h |
Operating Temperature |
5~45°C |
Maximum Operating Pressure |
-50KPa |
Suggested?Operating?Pressure |
0~-35KPa |
Maximum?backwashingPressure |
100KPa |
Operating Mode |
9min?Operation+1min?Break/8min?Operaetion+2min Break |
Blowing?Mode |
Continuous Aeration |
Aeration?Rate |
4m3/h.pc |
Washing Period |
Clean?water?backwashing?every?2~4h; CEB?every?2~4 weeks; CIP?every?6~12 months |
Using Conditions
There should be appropriate pretreatments before UF. If defoamer has to be used, please choose alcohol defoamer, silicone defoamer is forbidden.
Item |
Value |
PH?Range |
5~9 (washing: 2~12) |
Particle?Size |
<2mm, no?sharp?particles |
Oil & Grease |
≤2mg/L |
Hardness |
≤150mg/L |
Product detail pictures:
Related Product Guide:
Adhering into the principle of quality, provider, performance and growth, we now have gained trusts and praises from domestic and intercontinental consumer for factory Outlets for Ultrafiltration Filter - MBR Membrane Module Reinforced PVDF BM-SLMBR-25 Waste Water Treatment – Bangmo , The product will supply to all over the world, such as: Latvia, Singapore, United States, Providing high quality products, perfect service with reasonable prices are our principles. We also welcome OEM and ODM orders.Dedicated to strict quality control and thoughtful customer service, we are always available to discuss your requirements and ensure full customer satisfaction. We sincerely welcome friends to come negotiate business and start cooperation.